How to Remove Stains – Manalapan Carpet Cleaning

August 11, 2010 by admin · Leave a Comment
Filed under: Carpet Cleaning Tips 

So you’ve got a stain in your carpet. It happens to all of us. So what can you do to get rid of these trouble areas? The first thing to remember with any spot or stain is to address it immediately. The longer you wait, the more difficult it will be to remove the spot. Here are some cleaning and spot removal tips that can save your carpet.

First, let’s touch on some techniques and pointers to help alleviate the severity of any potential stains. The easiest of these would be to vacuum your carpets regularly. Vacuuming lessens oily soil build-up. With less build-up there is less for the stain to attach itself to. This makes clean ups a lot easier.

Second, know your carpet. Knowing what type of carpet you have will let you know what type of cleaners to use. Carpets react differently to certain chemicals so make sure you use the correct one. This will prevent you from fading and area of your carpet, or worse.

When using chemicals and detergents to clean your carpet you should resist the urge to drown the spot with your cleaner. A little goes a long way. Remember, you can always repeat the process but you can’t take back what you’ve already done. And whatever you do, do not rub the spot. You’re not waxing your care here. All rubbing does is press the stain further into your carpet and possibly into the padding. Apply your cleaner and slowly remove it with blotting.

Now for some cleaning tips. You don’t always have to call a professional. These home remedies can save you time and money. The easiest of these is plain lemon juice. Spray some on the problem area and let it set for a bit. Then dry with a paper towel. Remember not to over saturate and wet the padding.

Another solution is water and vinegar. These two ingredients can be your carpet’s best friends. Make a solution of even parts of vinegar and water. For example, a one to one ratio. Pour the solution on the stain and let the carpet absorb it. Then rub the stain in a circular motion with a sponge. Rinse the spot with warm water and place a white paper towel on it to dry.

Ammonia and water also combine to create a great cleaning agent. In a spray bottle, mix a tablespoon of ammonia with half a cup of water then spray onto the stain. Use a white paper towel to blot in the liquid. Do not over saturate. You want to avoid wetting the carpet backing.

One more home remedy you can try is to mix a solution consisting of a quarter cup of water and half a tablespoon of hand or dish soap in your trusty spray bottle. Avoid using a soap that contains bleach. Spray the mixture on the stain and blot dry the area with a white paper towel.

Just remember to always rinse the area after cleaning. Carpet products can sometimes leave behind residue, which if not removed, can cause problems like re-soiling or spots returning. Less is more when cleaning spots on your own. If you have a spot or stain that is being extraordinarily stubborn call a carpet cleaner. It’s always better to spend a few bucks on a professional cleaning than to replace your carpet.

Best Carpet Cleaning Techniques in Manalapan

July 28, 2010 by admin · Leave a Comment
Filed under: Carpet Cleaning Tips 

The procedures used to clean carpets will vary by the methods you use and prefer. A broad diversity of cleaners, powder, liquid, sanitizers, concentrates, stain-resistant and spotters deodorizers treatments exist to assist complete your tasks. Knowing the assignment of your cleaning job is significant in selecting the precise products for your purpose. As you clean more carpets, you will find out customer discontent with problems such as drying rime and carpets not appearing as clean as clients expected. To take this off before it becomes an problem, learn about carpet cleaning yourself.

Common Carpet Cleaning Methods

Rotary Method For Carpet Cleaning

This technique uses a single-disc rotary floor machine. A rotary brush straightly scrubs cleaner into the carpet from a tank on the machine. The dirty solution is removed with a wet vacuum.

Pros: Cleans totally by agitating the carpet stuffs. If extraction and rotary techniques are both used, the blend is the most efficient approach for heavy soil.

Cons: Requires skill to prevent oven wetting. Two machines are required: a wet vac and a floor machine. The carpet must be done in 4-foot by 4-foot areas or else the wet vac will not extract adequate material.

Foam Method For Carpet Cleaning

This machine uses cleaner in the form of foam that is scrubbed into the carpet with nylon roll brushes. The residue is removed with a wet almost right away. Afterward, a detailed dry-vacuuming is recommended.

Pros: Foam puts off water from soaking deeply into the carpet. The carpet dries relatively quickly.

Cons: Not successful on weighty soiling. Over wetting can result in water damage. The equipment can be hard to find. The brushes can harm elusive fibers.

Dry Powder Method For Carpet Cleaning

This is a fairly new technique in which dry absorbent material impregnated with dry-cleaning solvents and detergents is sprinkled onto die carpet and scrubbed into it with rotary brushes. The powder holds dirt in suspension and is dry-vacuumed away.

Pros: Certainly no risk of water damage. Carpet can be walked on right away. Powder can be used as an absorbent instantly after a spill.

Cons: Not useful on heavy soiling. The powder is not easy to out entirely and can stay in the carpet and resoil it. The brushes used to work into the carpet can harm delicate fibers.

If you think it’s time to get your carpets looking their best. Get in touch with your Manalapan carpet cleaner, and we can talk about some solutions for you.

Tile Floor and Grout Cleaning Tips

June 29, 2010 by admin · Leave a Comment
Filed under: Carpet Cleaning Tips, Uncategorized 

New Jersey tile flooring is a popular choice in all types of locations mainly due to the perception that it is easier to maintain and clean than other floorings. Wiping down a tiled floor seems easy enough but it is notable that unless cleaned regularly, a tiled floor can dull quickly and soon have an unsatisfactory appearance.

The tips for cleaning this type of flooring should be divided into the tiles and the grout – and both are equally important if the floor is to be kept in good condition.

With respect to the tiles – it is fundamental to make sure that all dirt and grit is kept off the surface. Most ceramic tiles have a glazed finish which is wipe clean friendly and aids cleaning. However, dirt and grit can cause scratches and surface abrasions which remove the finish and expose the tile leaving it susceptible to staining. Most grit and dirt comes from shoes, up to 80% of it, and therefore it can simply be a case of putting down a doormat.

Dirt will inevitably find its way into any location, especially commercial, so regular (preferably daily) sweeping and vacuuming to removing these dirt particles are recommended. Mopping should also be carried out frequently to keep the floor as clean as possible.

Care should be taken when moving heavy objects, especially furniture, as this can also mark and scratch the surface of the tiles, leaving them unprotected. Putting padded tips on the legs of chairs and corners of heavy objects is also an advisable strategy to offer additional protection.

If regular cleaning efforts still result in an unsatisfactory finish, it is probable that the surface of the tiles has been damaged. Once a stain becomes visible it is likely that layers of stains and bacteria have built up leaving a mark that is difficult or impossible to remove with traditional cleaning methods. In this case you may need to contact a professional company specializing in tile floor cleaning, which will be able to use heat and emulsification treatment to restore the floor to its original state.

Another reason that a tile floor may have an unsatisfactory appearance is the grout. Grout is a construction material which is generally used for filling voids and sealing joints, such as those between tiles. It normally consists of a mixture of cement, sand and water. Grout is a porous material and therefore stains easily.

The main tip for keeping grout clean is to clean up any spillages immediately. A liquid such as wine or coffee will stain the grout and it is vital that these areas are protected when possible.

Ideally grout should have a sealer, which will make it less permeable and aid cleaning and maintenance. This sealer will of course be susceptible to the same factors which cause damage to tiles. However the problem of staining is more likely in the case of grout due to its disposition. If you take a close look at grout, you will find that it is almost always recessed a little lower than the level of the tiles, so it is here that liquids will gather and stain.

Article Source: http://EzineArticles.com/?expert=David_Peter_Robertson

Carpet Cleaning Tips

February 8, 2010 by admin · Leave a Comment
Filed under: Carpet Cleaning Tips 

If you are looking for New Jersey carpet cleaning tips and ideas on how to extend the life of your carpet then you have come to the right place. Most people do not realize that there are certain things you can do to make your carpet last longer, look brighter and smell fresher. It is just something we walk on and no one really pays attention. But it can get to be quite expensive having to replace your carpet every few years. These carpet cleaning tips and the tips for maintaining your carpet will help to greatly extend its life.

Manufacturers recommend that you vacuum your carpet once a week. More often if necessary in areas of high traffic. Frequent vacuuming prevents dirt and dust particles from building up and damaging the carpet fibers. Every 3 or 4 weeks you should also use the crevice too to clean around baseboards and other hard to reach places.

It is important to take you time when vacuuming, especially if your carpet is very thick or plush, so you are sure to get all the dirt that may be deeply embedded in the fibers. One swipe of the vacuum is not enough. Go over each area slowly, several times, paying special attention to areas that get heavier traffic.

If odor is a problem, you can lightly sprinkle baking soda over your carpet, wait about 20 minutes for it to absorb the odors, and then vacuum it up. You can also add a few drops of your favorite essential oil to a small box of baking soda and use it in the same manner to give you room your favorite fragrance.

If you happen to spill something on your carpet, the quicker you clean it the better your chances of removing it and preventing a stain. Carefully blot or scrape the entire area before you tackle it with any kind of cleaning solution, removing as much of the moisture or soil as you possible can.

Before you try one of those harsh cleansers, be sure to try it out on a small spot first to make sure it will not damage or discolor your carpet. When applying the cleanser, do not rub the spill. That will only make it spread into the surrounding fibers and make it that much harder to try to remove. Word from the outside in, blotting up the moisture as you go.

Using a clean, white bath towel is your best bet. The chemicals in some cleaners may cause the coloring in your towel to bleed off onto the carpet as you are cleaning. Use the clean white towel to brush the nap back up to a standing position as you are cleaning the spill.

When you have finished your carpet cleaning, blot up as much excess moisture as possible. Then, cover the area with an absorbent white towel or a stack of paper towels and weight it down. Once the towels have absorbed all the moisture, uncover the spot and let it air dry. These New Jersey carpet cleaning tips should help your carpet last years longer.

Basic Carpet Cleaning Tips

January 20, 2010 by admin · Leave a Comment
Filed under: Carpet Cleaning Tips 

When it comes to New Jersey carpet cleaning most consumers are at a loss. The only question you might know to ask is how much is it going to be? This article will give you some basic information on carpet cleaning methods so that you can decide which one is right for you and so that you can better interview your potential carpet cleaners.

The most popular method of carpet cleaning is called “Steam Cleaning”. With this method the carpet is first sprayed with a cleaning solution and then the solution is extracted from the carpet removing the soil. Carpet will dry within six to twenty four hours after cleaning with this method.

Another popular method of cleaning is called shampoo cleaning. With this method the carpet is sprayed with a shampoo solution that is then agitated with the use of some sort of floor machine. The solution absorbs the soil and is then allowed to dry. After drying it becomes brittle and can be vacuumed out. Carpets are normally dry within one to two hours with this method.

Yet another method of cleaning is bonnet cleaning. With this method a solution is applied to the carpet and is then absorbed by cotton or synthetic cleaning pads mounted on a floor machine. Carpets are normally dry in one to two hours with this cleaning style.

A final method is called dry powder cleaning. With this method the carpet is sprinkled with a semi moist powder which is agitated into the carpet. The carpet is then allowed to dry and the powder is vacuumed out. This method usually yields drying times well under an hour.

As you can see there are a number of different cleaning methods. It is up to you to decide which method makes the most sense to you. Most New Jersey carpet cleaners have an agenda so you should do your research in advance and choose the method that you like the most. Good luck.